Yamaha XP560D, Owner'S Manual

Page: 38 / 126

Instrument an d control functions
5-2
5
sidestand up and while applying the
front or rear brake, push this switch to
crank the engine with the starter. See
page 7-2 for starting instructions prior
to starting the engine.
EAU79601
Hazar d switch “ ”
With the vehicle power is on or in park-
ing mode, use this switch to turn on the
hazard lights (simultaneous flashing of
all turn signal lights).
The hazard lights are used in case of an
emergency or to warn other drivers
when your vehicle is stopped where it
might be a traffic hazard.
NOTICE
ECA10062
Do not use the hazar d li g hts for an
exten d e d len g th of time with the en-
g ine not runnin g , otherwise the b at-
tery may d ischar g e.
EAU73951
Cruise control switches
See page 4-1 for an explanation of the
cruise control system.
EAU77301
Menu switch “MENU”
This switch is used to make setting
changes within the multi-function dis-
play. (See page 5-5.)
EAU77311
Select switch “ / ”
This switch is used to make setting
changes within the multi-function dis-
play. (See page 5-5.)
EAU73931
Drive mo d e switch “MODE”
See page 4-3 for an explanation of the
drive mode.
EAU77122
In d icator li g hts an d warnin g
li g hts
EAU88680
Turn si g nal in d icator li g hts “ ”
an d “ ”
Each indicator light will flash when its
corresponding turn signal lights are
flashing.
1. High beam indicator light “ ”
2. Traction control system indicator
light “ ”
3. Turn signal indicator lights “ ” and “ ”
4. Smart key system indicator light “ ”
5. ABS warning light “ ”
6. Malfunction indicator light “ ”
7. Cruise control indicator lights (XP560D)
1 2 4 5 6
3
7
1 2 4 5 6
3
7
UB3TE0E0.book Page 2 Tuesday, September 17, 2019 9:35 AM