Yamaha XP560D Owner'S Manual Download

Page: 118 / 126

Specifications

10-1

Dimensions:

Overall length:

2200 mm (86.6 in)

Overall width:

765 mm (30.1 in)

Overall height:

1420/1475 mm (55.9/58.1 in) (XP560E)
1420/1555 mm (55.9/61.2 in) (XP560D)

Seat height:

800 mm (31.5 in)

Wheelbase:

1575 mm (62.0 in)

Ground clearance:

125 mm (4.92 in)

Minimum turning radius:

2.8 m (9.19 ft)

Wei

ht:

Curb weight:

218 kg (481 lb) (XP560E)
220 kg (485 lb) (XP560D)

ine:

Combustion cycle:

4-stroke

Cooling system:

Liquid cooled

Valve train:

DOHC

Cylinder arrangement:

Inline

Number of cylinders:

2-cylinder

Displacement:

562 cm³

Bore

stroke:

70.0

73.0 mm (2.76

2.87 in)

Starting system:

Electric starter

ine oil:

Recommended brand:

SAE viscosity grades:

10W-40

Recommended engine oil grade:

API service SG type or higher, JASO
standard MA

Engine oil quantity:

Oil change:

2.60 L (2.75 US qt, 2.29 Imp.qt)

With oil filter removal:

2.90 L (3.07 US qt, 2.55 Imp.qt)

Coolant quantity:

Coolant reservoir (up to the maximum level
mark):

0.25 L (0.26 US qt, 0.22 Imp.qt)

Radiator (including all routes):

1.54 L (1.63 US qt, 1.36 Imp.qt)

Fuel:

Recommended fuel:

Unleaded gasoline (E10 acceptable)

Octane number (RON):

Fuel tank capacity:

15 L (4.0 US gal, 3.3 Imp.gal)

Fuel reserve amount:

3.0 L (0.79 US gal, 0.66 Imp.gal)

Fuel injection:

Throttle body:

ID mark:

B7M1 00

Front tire:

Type:

Tubeless

Size:

120/70R15M/C 56H

Manufacturer/model:

BRIDGESTONE/BATTLAX SCF

Rear tire:

Type:

Tubeless

Size:

160/60R15M/C 67H

Manufacturer/model:

BRIDGESTONE/BATTLAX SCR

Loa

Maximum load:

195 kg (430 lb) (XP560D)
197 kg (434 lb) (XP560E)

(Total weight of rider, passenger, cargo and
accessories)

Front

rake:

Type:

Hydraulic dual disc brake

Rear

rake:

Type:

Hydraulic single disc brake

UB3TE0E0.book Page 1 Tuesday, September 17, 2019 9:35 AM

Summary of Contents for XP560D































































































































Search results

Summary of Contents for XP560D

Reviews:

Related manuals for XP560D

Brands by name

Popular brands

Yamaha XP560D, Owner'S Manual

Search results

Summary of Contents for XP560D

Reviews:

Related manuals for XP560D

Brands by name

Popular brands