5-1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Instrument and control functions
EAU77490
Handlebar switches
Left
Right
EAU85660
Dimmer/Pass switch “
/
/PASS”
Set this switch to “
” for the high
beam and to “
” for the low beam.
To flash the high beam, press the
switch down to “PASS” while the head-
lights are on low beam.
TIP
When the switch is set to low
beam, the inner two headlights
come on.
When the switch is set to high
beam, all four headlights come on.
EAU66040
Turn signal switch “ / ”
To signal a right-hand turn, push this
switch to “
”. To signal a left-hand
turn, push this switch to “
”. When re-
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
EAU66030
Horn switch “
”
Press this switch to sound the horn.
EAU77450
Engine stop switch “ / ”
Set this switch to “
” before starting
the engine. Set this switch to “
” to
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
EAU77291
Power on/Starter switch “ON/ ”
With the smart key turned on and within
range, press this switch to turn on the
power to the vehicle. Then with the sid-
estand up and while applying the front
or rear brake, push this switch to crank
the engine with the starter. See page
7-2 for starting instructions prior to
starting the engine.
EAU79601
Hazard switch “ ”
With the vehicle power is on or in park-
ing mode, use this switch to turn on the
1. Select switch “
/
”
2. Menu switch “MENU”
3. Dimmer/Pass switch “
/
/PASS”
4. Cruise control setting switch “RES+/SET–”
5. Turn signal switch “
/
”
6. Horn switch “
”
7. Cruise control power switch “
”
1. Engine stop switch “
/
”
2. Mode switch “MODE”
3. Hazard switch “
”
4. Power on/Starter switch “ON/
”
RES
SET
PASS
1
2
3
4
5
6
7
MODE
1
3
4
2
BV1-9-E2.book 1 ページ ２０１８年８月２８日 火曜日 午後５時２８分
