Instrument an
d
control functions
5-3
5
EAU82302
Multi-function
d
isplay
WARNING
EWA12423
Be sure to stop the vehicle
b
efore
makin
g
any settin
g
chan
g
es to the
multi-function meter unit. Chan
g
in
g
settin
g
s while ri
d
in
g
can
d
istract the
operator an
d
increase the risk of an
acci
d
ent.
The “TRIP/INFO” switch is located on
the right side of the handlebar. This
switch allows you to control or change
the settings of the multi-function meter
unit. To use the “TRIP” switch, move
the “TRIP/INFO” switch in direction (a).
To use the “INFO” switch, move the
“TRIP/INFO” switch in direction (b).
TIP
To switch the displays between kilo-
meters and miles, turn the main switch
to “ON” while holding the “INFO”
switch, and then continue to hold the
“INFO” switch for eight seconds.
Clock
The clock uses a 24-hour time system.
To set the clock
1. Turn the main switch to “OFF”.
2. Push and hold the “TRIP” switch.
3. Turn the main switch to “ON”
while holding the “TRIP” switch,
and then continue to hold the
“TRIP” switch for eight seconds.
The hour digits will start flashing.
4. Use the “TRIP” switch to set the
hours.
5. Hold the “TRIP” switch for three
seconds, and then release it. The
minute digits will start flashing.
6. Use the “TRIP” switch to set the
minutes.
1. Fuel meter
2. Information display
3. Coolant temperature meter
4. Clock
5. Tripmeter display
6. Icy road warning indicator “
”
2
3
4
1
6
5
1. “TRIP/INFO” switch
1
(b)
(a)
1. Clock
1
UB5X10E0.book Page 3 Thursday, May 27, 2021 8:55 AM
