Yamaha XJR1300T 2004 Owner'S Manual Download Page 31 | Manualshive

Page: 31 / 90

background image

INSTRUMENT AND CONTROL FUNCTIONS

3-15

3

EAU14451

Storage compartment

The storage compartment is located
under the seat. (See page 3-14.)

WARNING

EWA10961

●

Do not exceed the load limit of 3
kg (7 lb) for the storage com-
partment.

●

Do not exceed the maximum
load of 203 kg (448 lb) for the ve-
hicle.

When storing the owner’s manual or
other documents in the storage com-
partment, be sure to wrap them in a
plastic bag so that they will not get wet.

When washing the vehicle, be careful
not to let any water enter the storage
compartment.

EAU14720

Adjusting the front fork

This front fork is equipped with spring
preload adjusting bolts.

WARNING

EWA10180

Always adjust both fork legs equal-
ly, otherwise poor handling and loss
of stability may result.

Adjust the spring preload as follows.

To increase the spring preload and
thereby harden the suspension, turn
the adjusting bolt on each fork leg in di-
rection (a). To decrease the spring pre-
load and thereby soften the
suspension, turn the adjusting bolt on
each fork leg in direction (b).

1. Storage compartment

1. Spring preload adjusting bolt

U5WM22E0.book Page 15 Tuesday, August 10, 2004 9:26 AM

ProCarManuals.com

«
...
29
30
31
32
33
...
»

Summary of Contents for XJR1300T 2004



























































































Reviews:

No comments

Related manuals for XJR1300T 2004

Brand: Öhlins Pages: 2

Brand: Öhlins Pages: 2

Brand: Öhlins Pages: 2

Brand: Öhlins Pages: 2

Brand: Öhlins Pages: 2

Brand: Öhlins Pages: 2

Brand: Öhlins Pages: 2

Brand: Öhlins Pages: 2

Brand: Öhlins Pages: 2

Brand: R&G Pages: 12

Brand: Sachs Bikes Pages: 71

Daytona Moto2 765 2020

Brand: Triumph Pages: 163

ZTechnik VStream Z2392

Brand: National Cycle Pages: 2

Brand: Honda Pages: 60

Brand: PIAGGIO Pages: 275

Brand: Memphis Shades Pages: 2

Brand: DYNATEK Pages: 3

Brand: DYNATEK Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands