Yamaha X-MAX 300, Owner'S Manual

Page: 97 / 116

Perio d ic maintenance an d a d justment
7-34
7
EAUT1331
Rear turn si g nal li g ht b ul b
If a rear turn signal light does not come
on, have a Yamaha dealer check the
electrical circuit or replace the bulb.
EAU78560
Replacin g the license plate
li g ht b ul b
1. Remove the license plate light unit
by removing the bolts and plate,
and then remove the license plate
light bulb socket (together with the
bulb) by pulling it out.
2. Remove the burnt-out bulb by
pulling it out.
3. Insert a new bulb into the socket.
4. Install the socket (together with
the bulb) by pushing it in, and then
install the license plate light unit by
installing the plate and bolts.
1. License plate light unit
2. Bolt
3. License plate light bulb socket
4. Plate
1. License plate light bulb
1
2
3
4
1
UB74E0E0.book Page 34 Tuesday, May 2, 2017 1:04 PM