Yamaha WR450FN 2022, Owner'S Service Manual

Page: 254 / 402

CLUTCH
5-52
6. Install:
• Lock washer “1”
•
Clutch boss nut “2”
NOTICE
ECA24660
Make sure to tighten to specification; other-
wise, it may damage the other part that is fas-
tened together.
TIP
• Align the notch in the lock washer “1” with the
detent rib “a” of the clutch boss.
• Apply engine oil to the threads and contact sur-
face of the clutch boss nut.
• Use the clutch holder “3” to hold the clutch
boss.
7. Bend the lock washer “1” tab.
8. Install:
• Friction plate 1 “1”
•
Clutch plate “2”
• Friction plate 2 “3”
TIP
•
Install the clutch plates and friction plates alter-
nately on the clutch boss, starting with a friction
plate and ending with a friction plate.
• From the clutch boss side, install the friction
plates in order: friction plate 1 (identification
color: black)

1, friction plate 2 (identification
color: purple)

6, and friction plate 1 (identifi-
cation color: black)

1.
•
Apply the engine oil on the friction plates and
clutch plates.
9. Install:
• Bearing “1”
•
Washer “2”
• Circlip “3”
(to the push rod 1 “4”)
TIP
Apply the engine oil on the bearing, washer and
push rod 1.
Clutch boss nut
75 N·m (7.5 kgf·m, 55 lb·ft)
Clutch holder
90890-04199
Universal clutch holder
YM-91042
1 1 1
2
3
3
3
E
Ne w
T
R
.
.
a
2
1
1 1 1
2 2 2
3 3 3
a. Identification color
1
a
1
3
2
2
2
1
E
E
E
E
Ne w