Yamaha WR250FM 2021, Owner'S Service Manual

Page: 34 / 404

INSTRUMENT AND CONTROL FUNCTIONS
1-22
EAM30188
FRONT BRAKE LEVER
The front brake lever “1” is located on the right
handlebar. Pull it toward the handlebar to acti-
vate the front brake.
EAM30189
REAR BRAKE PEDAL
The rear brake pedal “1” is in the right of the
chassis. Press down on the brake pedal to acti-
vate the rear brake.
EAM30190
SIDESTAND
This sidestand “1” is used to support only the
machine when standing.
WARNING
EWA18980
• Never apply additional force to the sides-
tand.
• Hold up the sidestand before starting out.
EAM30444
STARTER KNOB
Starting a cold engine requires a larger amount
of intake air, which is supplied by the starter
knob “1”.
Pushing the knob toward “a” turns ON the start-
er, resulting in a larger angle of throttle valve.
TIP
When operating the throttle grip in the closing di-
rection, the starter knob “1” moves in the direc-
tion “b” as shown and returns to its original
position.
WARNING
EWA20470
While handling the starter knob, take care
not to burn yourself on exhaust pipes.
EAM30192
FUEL TANK CAP
Fuel tank cap “1” is located under the fuel tank
cap cover “2”.
Remove the fuel tank cap cover to open the fuel
tank cap.
Shift up points
1st  2nd
20 km/h (12 mph)
2nd  3rd
30 km/h (19 mph)
3rd  4th
40 km/h (25 mph)
4th  5th
50 km/h (31 mph)
5th  6th
60 km/h (37 mph)
Shift down points
6th  5th
45 km/h (28 mph)
5th

4th
35 km/h (22 mph)
4th

3rd
25 km/h (16 mph)
3rd

2nd
25 km/h (16 mph)
2nd

1st
25 km/h (16 mph)
1
1
1
a a
b b
1 1