PERIODIC MAINTENANCE
3-2
TIP
•
The air filter needs more frequent service if you are riding in unusually wet or dusty areas.
•
Hydraulic brake service
•
After disassembling the brake master cylinders and calipers, always change the fluid. Regularly
check the brake fluid levels and fill the reservoirs as required.
3
*
Spark arrester
•
Clean.
4
*
Front brake
•
Check operation, fluid level, and for fluid leakage.
•
Replace brake pads if necessary.
•
Replace brake fluid every 1 year.
Every 1 year
5
*
Rear brake
•
Check operation, fluid level, and for fluid leakage.
•
Replace brake pads if necessary.
•
Replace brake fluid every 1 year.
Every 1 year
6
*
Brake hoses
•
Check for cracks or damage.
•
Replace.
Every 4 years
7
*
Wheels
•
Check runout, spoke tightness and for damage.
•
Tighten spokes if necessary.
8
*
Tires
•
Check tread depth and for damage.
•
Replace if necessary.
•
Check air pressure.
•
Correct if necessary.
9
*
Wheel bearings
•
Check bearings for smooth operation.
•
Replace if necessary.
10
*
Swingarm pivot
bearings
•
Check bearing assemblies for looseness.
•
Moderately repack with lithium-soap-based grease.
11
Drive chain
•
Check chain slack/alignment and condition.
•
Adjust and lubricate chain with a special O-ring
chain lubricant thoroughly.
Every ride
12
*
Steering bearings
•
Check bearing assemblies for looseness.
•
Moderately repack with lithium-soap-based grease
every 1200 mi (2000 km) or 12 months (whichever
comes first).
13
Brake and clutch
lever pivot shafts
•
Apply lithium-soap-based grease (all-purpose
grease) or silicone grease lightly.
14
Brake pedal pivot
shafts
•
Apply lithium-soap-based grease (all-purpose
grease) lightly.
15
Sidestand pivot
•
Check operation.
•
Apply lithium-soap-based grease (all-purpose
grease) lightly.
16
*
Front fork
•
Check operation and for oil leakage.
•
Replace if necessary.
17
*
Shock absorber
assembly
•
Check operation and for oil leakage.
•
Replace if necessary.
18
*
Rear suspension
link pivots
•
Apply molybdenum disulfide grease lightly.
19
*
Control cables
•
Apply Yamaha chain and cable lube or engine oil
10W-30 thoroughly.
20
*
Throttle grip hous-
ing and cable
•
Check operation and free play.
•
Adjust the throttle cable free play if necessary.
•
Lubricate the throttle grip housing and cable.
21
*
Chassis fasteners
•
Check all chassis fitting and fasteners.
•
Correct if necessary.
22
Battery
•
Check terminal for looseness and corrosion.
No.
Item
Checks and maintenance jobs
Initial
Odometer readings
600 mi
(1000 km) or
1 month
1800 mi
(3000 km) or
3 months
3000 mi
(5000 km) or
6 months
Summary of Contents for WR250F 2023
