Yamaha WR 155, Owner'S Manual

Page: 74 / 92

Perio d ic maintenance an d a d justment
7-32
7
EAUM2611
Replacin g a tail/ b rake li g ht
b ul b
1. Remove panel B. (See page 7-7.)
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
3. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
5. Install the socket (together with
the bulb) by turning it clockwise.
6. Install the panel.
EAU24205
Replacin g a turn si g nal li g ht
b ul b
1. Remove the turn signal light lens
by removing the screw.
2. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw.
NOTICE:
Do not over-
ti g hten the screw, otherwise the
lens may b reak.
[ECA11192]
EAU24314
Replacin g the license plate
li g ht b ul b
1. Remove the license plate light unit
by removing the screws.
2. Remove the license plate light
bulb socket (together with the
bulb) by pulling it out.
3. Remove the burnt-out bulb by
pulling it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by pushing it in.
6. Install the license plate light unit by
installing the screws.
1. Tail/brake light bulb socket
1
1. Turn signal light lens
2. Screw
1
2
1. License plate light bulb
2. Screw
1
2
UB3MEZE0.book Page 32 Thursday, December 26, 2019 2:23 PM