Yamaha WR 155 Owner'S Manual Download Page 73

Page: 73 / 92

Perio

ic maintenance an

justment

7-31

3. Unhook the headlight bulb holder,

and then remove the burnt-out
bulb.

4. Place a new headlight bulb into

position, and then secure it with
the bulb holder.

5. Install the bulb cover, and then

connect the coupler.

6. Install the headlight cowling (to-

gether with the headlight unit) by
placing it in the original position,
and then installing the bolts.

7. Have a Yamaha dealer adjust the

headlight beam if necessary.

EAU45226

Replacin

the auxiliary li

If the auxiliary light bulb burns out, re-
place it as follows.

1. Remove the headlight unit. (See

page 7-30.)

2. Remove the auxiliary light bulb

socket (together with the bulb) by
pulling it out.

3. Remove the burnt-out bulb by

pulling it out.

4. Insert a new bulb into the socket.
5. Install the socket (together with

the bulb) by pushing it in.

6. Install the headlight unit.

1. Headlight coupler
2. Bulb cover

1. Headlight bulb holder

1. Auxiliary light bulb socket

UB3MEZE0.book Page 31 Thursday, December 26, 2019 2:23 PM

Summary of Contents for WR 155





























































































Search results

Summary of Contents for WR 155

Reviews:

Related manuals for WR 155

Brands by name

Popular brands

Yamaha WR 155, Owner'S Manual

Search results

Summary of Contents for WR 155

Reviews:

Related manuals for WR 155

Brands by name

Popular brands