manualshive.com logo in svg

Yamaha WOLVERINE YXE70WPAH, Owner'S Manual

Share
Download
Yamaha WOLVERINE YXE70WPAH Owner'S Manual Download Page 49

4-11

4

NOTICE

ECB00812

If the multi-function display indicates an
error code, the vehicle should be checked
as soon as possible in order to avoid en-
gine damage.

 

EBU31390

Light switch “

/

/

”

Set the switch to “

” to turn on the low

beam and the taillights.
Set the switch to “

” to turn on the high

beam and the taillights.

Set the switch to “

” to turn off the head-

lights and taillights.

NOTICE

ECB02060

Do not use the headlights with the engine
turned off for an extended period of time.
The battery may discharge to the point
that the starter motor will not operate
properly. If this should happen, remove the
battery and recharge it.

 

1. Light switch “

/

/

”

L

H

1

L

H

L

H

U2MB7BE0.book  Page 11  Thursday, March 3, 2016  11:46 AM

Summary of Contents for WOLVERINE YXE70WPAH



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands