manualshive.com logo in svg

Yamaha WOLVERINE YFM45FXX, Owner'S Manual, Page: 24 / 166

Share
Download
Yamaha WOLVERINE YFM45FXX Owner'S Manual Download Page 24

4-6

4

WARNING

EWB00120

EBU18270

Throttle lever 

Once the engine is running, movement of the throt-
tle lever will increase the engine speed.
Regulate the speed of the ATV by varying the
throttle position. Because the throttle is spring-
loaded, the ATV will decelerate, and the engine will
return to an idle any time the hand is removed from
the throttle lever.

1. On-Command four-wheel-drive switch “2WD”/“4WD”

POTENTIAL HAZARD
Changing from two-wheel drive to four-
wheel drive or from four-wheel drive to two-
wheel drive while the ATV is moving.

WHAT CAN HAPPEN
The ATV handles differently in two-wheel
drive than in four-wheel drive in some cir-
cumstances. Changing from two-wheel drive
to four-wheel drive or from four-wheel drive
to two-wheel drive while moving may cause
the ATV to unexpectedly handle differently.
This could distract the operator and in-
crease the risk of losing control and of caus-
ing an accident.
HOW TO AVOID THE HAZARD
Always stop the ATV before changing from
two-wheel drive to four-wheel drive or vice-
versa.

U3C212E0.book  Page 6  Tuesday, June 26, 2007  4:30 PM

Summary of Contents for WOLVERINE YFM45FXX







































































































































































Reviews:

No comments