5-14
5
To limit vehicle top speed
1. Turn the main switch to “
” (off).
2. Remove the hood. (See page 9-10.)
3. Insert the system key into the Speed
Management System switch and turn it
to “
”.
4. Remove the system key.
5. Install the hood.
6. Turn the main switch to “
” (on) and
confirm that the speed management icon
comes on. (See page 5-10.)
TIP
The main switch must be turned to “
” (off)
and then back to “
” (on) before Speed
Management System changes are recog-
nized by the vehicle.
WARNING
EWB04210
Before using the system key, stop the en-
gine.
Remove the system key immediately after
use, otherwise the switch may change po-
sitions when driving over bumpy roads or
fall out and be lost.
EBU31391
Light switch “
/
/
”
Set the switch to “
” to turn on the low
beam and the taillights.
Set the switch to “
” to turn on the high
beam and the taillights.
Set the switch to “
” to turn off the head-
lights and taillights.
1. Light switch “
/
/
”
L
H
1
L
H
L
H
UBAR11E0.book Page 14 Monday, July 27, 2020 4:42 PM
