Yamaha WOLVERINE RMAX2 2024 Owner'S Manual Download

Page: 61 / 196

5-23

TIP

Adjust the driver seat position and make sure
it is locked in place before starting off.

EBU35002

Adjusting the steering wheel position

The steering wheel position can be adjusted
to suit the driver’s preference.

WARNING!

Never adjust the steering wheel position

while operating the vehicle, otherwise the
steering wheel may suddenly change posi-
tion, which may lead to an accident.

[EWB04000]

To adjust the steering wheel position, pull the
steering wheel position adjusting lever and
move the steering wheel to the desired posi-
tion.

TIP

Adjust the steering wheel position before
starting off.

1. Driver seat position adjusting lever
2. Driver seat

1. Steering wheel position adjusting lever

UD2670E0.book Page 23 Tuesday, April 25, 2023 1:24 PM

Summary of Contents for WOLVERINE RMAX2 2024





































































































































































































Search results

Summary of Contents for WOLVERINE RMAX2 2024

Reviews:

Related manuals for WOLVERINE RMAX2 2024

Brands by name

Popular brands

Yamaha WOLVERINE RMAX2 2024, Owner'S Manual

Search results

Summary of Contents for WOLVERINE RMAX2 2024

Reviews:

Related manuals for WOLVERINE RMAX2 2024

Brands by name

Popular brands