Yamaha WOLVERINE RMAX2 2024 Owner'S Manual Download

Page: 181 / 196

11-1

EBU32751

SPECIFICATIONS

EBU38811

TIP

The 4-digit model type code can be con-
firmed by checking the model label. (See
page 1-1.)

Dimensions:

Overall length:

3030 mm (119.3 in)

Overall width:

1680 mm (66.1 in)

Overall height:

1975 mm (77.8 in)

Wheelbase:

2202 mm (86.7 in)

Ground clearance:

350 mm (13.8 in)

Weight:

Curb weight:

834.0 kg (1839 lb) (D268)
837.0 kg (1845 lb) (D264)
851.0 kg (1876 lb) (D262)
855.0 kg (1885 lb) (D266)

Engine:

Combustion cycle:

4-stroke

Cooling system:

Liquid cooled

Valve train:

DOHC

Cylinder arrangement:

Inline

Number of cylinders:

2-cylinder

Displacement:

999 cm³

Bore

stroke:

93.0

73.5 mm (3.66

2.89 in)

Starting system:

Electric starter

Engine oil:

Recommended brand:

SAE viscosity grades:

0W-30, 10W-30, 10W-40

UD2670E0.book Page 1 Tuesday, April 25, 2023 1:24 PM

Summary of Contents for WOLVERINE RMAX2 2024





































































































































































































Search results

Summary of Contents for WOLVERINE RMAX2 2024

Reviews:

Related manuals for WOLVERINE RMAX2 2024

Brands by name

Popular brands

Yamaha WOLVERINE RMAX2 2024, Owner'S Manual

Search results

Summary of Contents for WOLVERINE RMAX2 2024

Reviews:

Related manuals for WOLVERINE RMAX2 2024

Brands by name

Popular brands