Yamaha WOLVERINE RMAX2 2024, Owner'S Manual

Page: 172 / 196

9-57
9
4. Turn on the main switch, start the engine,
and turn on the electrical circuit in ques-
tion to check if the device operates. If the
fuse blows again immediately, have a
Yamaha dealer check the electrical sys-
tem.
5. Install the hood.
EBU39550
Headlights
This model is equipped with LED headlights.
There are no user replaceable bulbs. If one or
more headlights do not come on, check for a
loose connection, check the headlight fuse,
and then have a Yamaha dealer check the ve-
hicle.
TIP

When the headlights are set to low beam,
the outer two headlights come on.

When the headlights are set to high beam,
all four headlights come on.
EBU39611
Headlight beam adjustment
NOTICE
ECB00691
It is advisable to have a Yamaha dealer
make this adjustment.
To adjust the headlight beam
1. Remove the hood. (See page 9-10.)
2. Remove the headlight cover by removing
the quick fastener screws.
1. Quick fastener screw
1 1 1
UD2670E0.book Page 57 Tuesday, April 25, 2023 1:24 PM