Yamaha WOLVERINE R MAX 2021 Manual Download

Page: 45 / 190

5-14

NOTICE

ECB00812

If the multi-function display indicates an
error code, the vehicle should be checked
as soon as possible in order to avoid en-
gine damage.

EBU37660

Speed Management System

This model is equipped with a Speed Man-
agement System. When the Speed Manage-
ment System switch is set to the “

”

position, the vehicle’s top speed is limited to
approximately 40 km/h (25 mph).

WARNING!

This system works via the electronic throt-
tle valve and cannot slow the vehicle. Use
the brakes to slow the vehicle.

[EWB04200]

1. System key (gray)

1. Speed Management System switch

UB4M11E0.book Page 14 Tuesday, August 4, 2020 1:04 PM

Summary of Contents for WOLVERINE R MAX 2021































































































































































































Search results

Summary of Contents for WOLVERINE R MAX 2021

Reviews:

Related manuals for WOLVERINE R MAX 2021

Brands by name

Popular brands

Yamaha WOLVERINE R MAX 2021, Manual

Search results

Summary of Contents for WOLVERINE R MAX 2021

Reviews:

Related manuals for WOLVERINE R MAX 2021

Brands by name

Popular brands