9-27
9
4. Install the drain bolt and its new gasket,
and then tighten the bolt to the specified
torque.
5. Refill with the recommended final gear oil
up to the brim of the filler hole.
6. Check the oil filler bolt gasket for dam-
age, and replace it if necessary.
7. Install the oil filler bolt and its gasket, and
then tighten the bolt to the specified
torque.
8. Check for oil leakage. If oil leakage is
found, check for the cause.
EBU36065
Differential gear oil
Check the oil level and change the differential
gear oil at the intervals specified in the period-
ic maintenance chart.
NOTICE
ECB03600
When checking or changing the differen-
tial gear oil, make sure that no foreign ma-
terial enters the differential gear case. If
necessary, clean the differential gear oil
filler bolt and surrounding area.
Checking the differential gear oil level
1. Park the vehicle on a level surface.
Tightening torque:
Final gear oil drain bolt:
20 N·m (2.0 kgf·m, 15 lb·ft)
Tightening torque:
Final gear oil filler bolt:
23 N·m (2.3 kgf·m, 17 lb·ft)
Recommended oil:
YAMALUBE
SAE 80W-90 API GL-5 Hypoid gear oil
Oil quantity:
0.31 L (0.33 US qt, 0.27 Imp.qt)
UB4M11E0.book Page 27 Tuesday, August 4, 2020 1:04 PM
