Yamaha WOLVERINE 350 YFM35XY, Owner'S Manual, Page: 113 / 128

8-42
8
4. Remove the nuts from the wheel.
5. Remove the wheel.
EBU25701
Installing a wheel
1. Place the ATV on a level surface.
2. Install the wheel and the nuts.
TIP
●
The arrow mark on the tire must point toward
the rotating direction of the wheel.
●
Tapered nuts are used for both the front and rear
wheels. Install the nuts with their tapered side to-
wards the wheel.
3. Lower the ATV to the ground.
4. Tighten the wheel nuts to the specified
torques.
1. Arrow mark
1. Tapered nut
Tightening torques:
Front wheel nut:
55 Nm (5.5 m·kgf, 40 ft·lbf)
Rear wheel nut:
55 Nm (5.5 m·kgf, 40 ft·lbf)
U3D563E0.book Page 42 Monday, May 12, 2008 11:12 AM