manualshive.com logo in svg

Yamaha WaveRunner 2002 XLT1200, Owner'S/Operator'S Manual

The Yamaha WaveRunner 2002 XLT1200 Owner's/Operator's Manual is now available for free download on our website. This comprehensive manual contains all the essential information you need to safely operate and maintain your WaveRunner. Visit manualshive.com to easily download this essential manual.

Share
Download
background image

6-4

E

EJU01125 

Index

2-stroke engine oil................................... 3-2

A

Adjusting the carburetor ........................ 4-22
Adjusting the choke cable ..................... 4-19
Adjusting the trolling speed ................... 4-22
Approval label of Emission control 
certificate................................................. 1-2

B

Battery..............................................3-8, 4-5
Battery warning indicator....................... 2-29
Beaching the watercraft ........................ 3-31
Bilge ........................................................ 3-7
Bleeding the oil injection pump ............. 4-23
Boarding alone ...................................... 3-24
Boarding and starting in deep water ..... 3-24
Boarding with passengers..................... 3-25
Bow down.............................................. 2-16
Bow up .................................................. 2-16

C

Capsized watercraft .............................. 3-26
Caution labels ......................................... 1-6
Choke knob ........................................... 2-10
Cleaning and adjusting the 
spark plugs............................................ 4-15
Cleaning the jet intake and impeller ........ 5-4
Cleaning the watercraft ........................... 4-6
Clock ..................................................... 2-25
Connecting the jumper cables................. 5-6
Cooling water pilot outlet..............2-12, 3-13
Crossing ................................................ 1-17
Cruising limitations .................................. 1-9

D

Docking the watercraft .......................... 3-31

E

Emergency procedures ........................... 5-4
Emission control information ................... 1-2
Engine break-in ..................................... 3-14
Engine compartment ............................... 3-6
Engine oil meter .................................... 2-25
Engine overheat warning indicator........ 2-28

Engine overheat warning system .......... 2-17
Engine serial number .............................. 1-1
Engine shut-off cord (lanyard) ............... 3-12
Engine shut-off switch ........................... 2-10
Engine stop switch ................................ 2-10
Enjoy your watercraft responsibly ......... 1-21
Exhaust temperature warning 
indicator................................................. 2-29
Exhaust temperature warning 
system ................................................... 2-19

F

Filling the fuel tank .................................. 3-3
Filling the oil tank .................................... 3-4
Fire extinguisher...................................... 3-9
Fishing vessel right-of-way.................... 1-18
Flushing the cooling system .................... 4-1
Front seat ................................................ 2-6
Front storage compartment ................... 2-30
Fuel and oil.............................................. 3-1
Fuel and oil systems ............................... 3-6
Fuel cock knob ........................................ 2-9
Fuel filter ............................................... 4-11
Fuel meter ............................................. 2-24
Fuel system ............................................. 4-4
Fuel tank ............................................... 4-11
Fuel tank filler cap ................................... 2-8
Fuel warning indicator ........................... 2-27

G

Gasohol ................................................... 3-2
Gasoline .................................................. 3-1
Getting to know your watercraft ............ 3-20
Give-way vessel .................................... 1-16
Glove compartment ............................... 2-31

H

Handgrip................................................ 2-16
Hazard information ................................ 1-13
Hood........................................................ 2-7
Hour meter ............................................ 2-26
Hull Identification Number (HIN).............. 1-1

I

Identification numbers ............................. 1-1
Important labels....................................... 1-3

UF0V11.book  Page 4  Monday, July 9, 2001  2:01 PM

Summary of Contents for WaveRunner 2002 XLT1200















































































































































Reviews:

No comments

Related manuals for WaveRunner 2002 XLT1200

SeaDoo SPARK 2022 Series Operator'S Manual preview
SPARK 2022 Series
Brand: SeaDoo Pages: 196
Catalina Yachts Catalina 22 1987 Owners Manual And General Handbook preview
Catalina 22 1987
Brand: Catalina Yachts Pages: 35
RS SAILING RS Neo Rigging Manual preview
RS Neo
Brand: RS SAILING Pages: 47
Blade 2013 LADY FAT User Manual preview
2013 LADY FAT
Brand: Blade Pages: 19
Stand Up Floats Swan Instruction Sheet preview
Swan
Brand: Stand Up Floats Pages: 4
Supra COMP ts6m 1989 Owner'S Manual preview
COMP ts6m 1989
Brand: Supra Pages: 89
Grady-White Boats Fisherman 216 Owner'S Manual preview
Fisherman 216
Brand: Grady-White Boats Pages: 70
Grady-White Boats FREEDOM 205 Owner'S Manual preview
FREEDOM 205
Brand: Grady-White Boats Pages: 74
J/Boats J 35 Owner'S Manual preview
J 35
Brand: J/Boats Pages: 23
Sailfish 360 CC Owner'S Manual preview
360 CC
Brand: Sailfish Pages: 80
Jeanneau SUN ODYSSEY 349 Owner'S Manual preview
SUN ODYSSEY 349
Brand: Jeanneau Pages: 100
Jeanneau SUN ODYSSEY 50DS Owner'S Manual preview
SUN ODYSSEY 50DS
Brand: Jeanneau Pages: 156
Intex CHALLENGER 3a Owner'S Manual preview
CHALLENGER 3a
Brand: Intex Pages: 13
Lake Powell 48 NAVIGATOR Instruction Manual preview
48 NAVIGATOR
Brand: Lake Powell Pages: 28
Creek Company ODC 816 Assembly Instructions preview
ODC 816
Brand: Creek Company Pages: 4
Ocean Kayak Nalu Brochure preview
Nalu
Brand: Ocean Kayak Pages: 1
SEAS Catalina 30 Operating Manual preview
Catalina 30
Brand: SEAS Pages: 29
Solstice OUTDOORSMAN 9000 Manual preview
OUTDOORSMAN 9000
Brand: Solstice Pages: 3

Brands by name

Popular brands

Load more brands