background image

2

VXL1B-24/VXL1W-24/VXL1B-16/VXL1W-16/VXL1B-8/VXL1W-8 Installation Guide

PLEASE READ CAREFULLY BEFORE 

PROCEEDING

Please keep this manual in a safe place for 

future reference.

 WARNING

Always follow the basic precautions listed 

below to avoid the possibility of serious 

injury or even death from electrical shock, 

short-circuiting, damages, fire or other 

hazards. These precautions include, but are 

not limited to, the following:

Do not open

•  Do not disassemble or modify this device 

(painting excepted). Doing so may cause 

electrical shock, fir

e, injury or malfunction.

If it should appear to be malfunctioning, 

discontinue use immediately and have it 

inspected by qualified Y

amaha service 

personnel.

Hearing loss

•  When turning on the AC power in your audio 

system, always tur

n on the power amplifier 

LAST, to avoid hearing loss and speaker 

damage. When turning the power off, the 

power amplifier should be tur

ned off FIRST 

for the same reason.

Fire warning

•  Do not place any burning items or open 

flames near the device, since they may 

cause a fir

e.

•  Do not use the optional brackets for other 

speakers besides the ones specified. Doing 

so may cause an accident.

If you notice any abnormality

•  If any of the following problems occur, 

immediately turn off the power of the 

amplifier

.

- Unusual smells or smoke are emitted.
- Some object has been dropped into the 

device.

- There is a sudden loss of sound during use 

of the device.

- Cracks or other visible damage appear on 

the device.

Then have the device inspected or repaired 

by qualified Y

amaha service personnel.

 CAUTION

Always follow the basic precautions listed 

below to avoid the possibility of physical 

injury to you or others, or damage to the 

device or other property. These precautions 

include, but are not limited to, the following:

Location

•  Do not place the device in an unstable 

position where it might accidentally fall over 

and cause injuries.

•  Do not place the device in a location where it 

may come into contact with corrosive gases 

or salt air. Doing so may result in malfunction.

•  Avoid being near the device during a 

disaster, such as an earthquake. Since the 

device may fall and cause injury, stay away 

from the device quickly and move to a safe 

place.

•  Before moving the device, remove all 

connected cables.

•  Be sure to contact a professional installer, if 

the speaker installation requires construction 

work, and make sure to observe the following 

precautions.
- Follow the instructions listed in the 

Installation Guide when wiring or installing. 

- Choose mounting hardware and an 

installation location that can support the 

weight of the device.

- Avoid locations that are exposed to 

constant vibration.

- Use the required tools to install the device. 

Use the specified mounting bracket, bolts 

and screws. 

- Inspect the device periodically.

Connections

•  Use only speaker cables for connecting 

speakers to the speaker jacks. Use of other 

types of cables may r

esult in fir

e.

Handling caution

•  Do not hang heavy objects from this device. 

Avoid applying excessive force to the 

switches or connectors to prevent injuries.

PA-8 1/2

PRECAUTIONS

Summary of Contents for VXL Series















Reviews: