manualshive.com logo in svg

Yamaha VMAX VMX17, Owner'S Manual, Page: 74 / 112

Share
Download
Yamaha VMAX VMX17 Owner'S Manual Download Page 74

PERIODIC MAINTENANCE AND ADJUSTMENT

6-19

6

14. Install the coolant reservoir cap,

and then install the reservoir cap
guard by installing the bolt.

15. Install the radiator cap.
16. Start the engine, let it idle for sev-

eral minutes, and then turn it off.

17. Remove the radiator cap to check

the coolant level in the radiator. If
necessary, add sufficient coolant
until it reaches the top of the radi-
ator, and then install the radiator
cap.

18. Check the coolant level in the res-

ervoir. If necessary, remove the
coolant reservoir cap guard and

the cap, add coolant to the maxi-
mum level mark, and then install
the cap and the cap guard.

19. Start the engine, and then check

the vehicle for coolant leakage. If
coolant is leaking, have a Yamaha
dealer check the cooling system.

20. Install the right air intake duct by

installing the bolts.

21. Install the cowling.

EAU36765

Air filter element

The air filter element must be replaced
at the intervals specified in the periodic
maintenance and lubrication chart.
Have a Yamaha dealer replace the air
filter element.

Antifreeze/water mixture ratio:

1:1

Recommen

d

e

d

 antifreeze:

High-quality ethylene glycol anti-
freeze containing corrosion inhibi-
tors for aluminum engines

Coolant quantity:

Radiator (including all routes):

3.75 L (3.96 US qt, 3.30 Imp.qt)

Coolant reservoir (up to the maxi-
mum level mark):

0.27 L (0.29 US qt, 0.24 Imp.qt)

U2CEE0E0.book  Page 19  Wednesday, August 27, 2014  11:11 AM

Summary of Contents for VMAX VMX17

















































































































Reviews:

No comments