Yamaha VIKING YX70MPJ Owner'S Manual Download Page 68

Page: 68 / 170

6-3

Do not turn the key to the “

” (start) position

with the engine running; otherwise, damage
to the electric starter may result.

TIP

For maximum engine life, never accelerate
hard when the engine is cold!

EBU31912

Drive select lever operation and re-
verse driving

NOTICE

ECB02150

Do not shift without coming to a complete
stop and waiting for the engine to return to
normal idle speed. Damage to the engine
or drive train may occur.

Shifting: neutral to high and high to low

1. Stop the vehicle, and take your foot off

the accelerator pedal.

2. Apply the brake pedal, then shift by mov-

ing the drive select lever along the shift
guide. Make sure that the drive select le-
ver is completely shifted into position.

3. Release the parking brake, if applied.
4. Release the brake pedal and press the

accelerator pedal gradually.

1. Drive select lever
2. L (Low-range)
3. H (High-range)
4. N (Neutral)
5. R (Reverse)

UB5F70E0.book Page 3 Monday, March 27, 2017 3:05 PM

Summary of Contents for VIKING YX70MPJ











































































































































































Search results

Summary of Contents for VIKING YX70MPJ

Reviews:

Related manuals for VIKING YX70MPJ

Brands by name

Popular brands

Yamaha VIKING YX70MPJ, Owner'S Manual

Search results

Summary of Contents for VIKING YX70MPJ

Reviews:

Related manuals for VIKING YX70MPJ

Brands by name

Popular brands