Yamaha VIKING YX70MPAJ Owner'S Manual Download Page 41

Page: 41 / 170

4-11

EBU31391

Light switch “

”

Set the switch to “

” to turn on the low

beam and the taillights.
Set the switch to “

” to turn on the high

beam and the taillights.
Set the switch to “

” to turn off the head-

lights and taillights.

NOTICE

ECB02061

Do not use the headlights with the engine
turned off for an extended period of time.
The battery may discharge to the point

that the electric starter will not have
enough power to crank the engine. If this
should happen, remove the battery and re-
charge it.

EBU31401

On–Command drive knob
“2WD/4WD/DIFF LOCK”

Stop the vehicle and move the On–Command
drive knob to change from two–wheel drive,
four–wheel, four–wheel drive with differential

1. Light switch “

”

1. On-Command drive knob “2WD/4WD/DIFF LOCK”

UB5F70E0.book Page 11 Monday, March 27, 2017 3:05 PM

Summary of Contents for VIKING YX70MPAJ











































































































































































Search results

Summary of Contents for VIKING YX70MPAJ

Reviews:

Related manuals for VIKING YX70MPAJ

Brands by name

Popular brands

Yamaha VIKING YX70MPAJ, Owner'S Manual

Search results

Summary of Contents for VIKING YX70MPAJ

Reviews:

Related manuals for VIKING YX70MPAJ

Brands by name

Popular brands