Components
31
EMU26092
Main switch
The main switch controls the ignition system;
its operation is described below.
“
”
(off)
With the main switch in the “
” (off) posi-
tion, the electrical circuits are off, and the key
can be removed.
“
”
(on)
With the main switch in the “
” (on) posi-
tion, the electrical circuits are on, and the key
cannot be removed.
“
”
(start)
With the main switch in the “
” (start) po-
sition, the starter motor turns to start the en-
gine. When the key is released, it returns
automatically to the “
” (on) position.
EMU32054
Power trim and tilt switch on remote
control
The power trim and tilt system adjusts the
outboard motor angle in relation to the tran-
som. Pushing the switch “
” (up) trims the
outboard motor up, and then tilts it up. Push-
ing the switch “
” (down) tilts the outboard
motor down and trims it down. When the
switch is released, the outboard motor will
stop in its current position. For instructions
on using the power trim and tilt switch, see
pages 63 and 65.
EMU26156
Power trim and tilt switch on bottom
cowling
The power trim and tilt switch is located on
the side of the bottom cowling. Pushing the
switch “
” (up) trims the outboard motor up,
and then tilts it up. Pushing the switch “
”
(down) tilts the outboard motor down and
ZMU06245
ON
OFF
START
ZMU07019
ON
OFF
START
1. Power trim and tilt switch
1. Power trim and tilt switch
ZMU069
8
1
DN
1
UP
ZMU07849
UP
DN
1
6CB-9-3B-1E0.book 31 ページ ２０１７年１１月１６日 木曜日 午後５時２９分
©
2019 Yamaha Motor Corporation, U.S.A.
