Periodic maintenance
63
ESU12220
Replacing a headlight bulb
WARNING
EWS00530
Keep flammable products and your hands
away from the hot bulb until it has cooled
down.
1.
Remove the top cover. (See page 40 for
removal procedures.)
2.
Remove the screws, and then remove
the headlight access panel.
3.
Disconnect the headlight coupler.
4.
Remove the bulb holder cover.
5.
Unhook the bulb holder by pushing it in,
then clockwise.
1. Lubrication point
1. Lubrication point
1. Screw
1. Screw
2. Headlight access panel
1. Headlight coupler
2. Bulb holder cover
U8GM10E0.book Page 63 Friday, April 27, 2007 6:43 PM
Summary of Contents for Vector RS90RX
