47
En
Operating various settings for this unit (Setup menu)
English
INTR
ODUCTION
AD
DITIONAL
INFORMA
T
ION
APPENDIX
PRE
P
ARA
T
ION
BA
S
IC
OPERA
T
ION
AD
V
ANCED
OPERA
T
ION
Sets the maximum volume level and initial volume level
of Zone2.
y
•
This item is displayed only when “Extra SP Assign” is set to “Zone2.”
■
Max Volume
Sets the maximum volume level of Zone2, so that the
volume will not be accidentally increased. For example,
you can adjust the volume between –80.0 dB and –5.0 dB
when you set this parameter to “–5.0dB.”
■
Init. Volume
Use this feature to set the volume level of Zone2 when the
power of Zone2 unit is turned on.
Note
•
If the setting of “Max Volume” is lower than the setting of “Init.
Volume,” the setting of “Max Volume” becomes effective. For example,
when you set “Max Volume” to “–30.0dB” and “Init. Volume” to
“0.0dB,” the volume is automatically set to “–30.0dB” at the next time
this unit is turned on.
You can set parameters for the sound field programs. For
details, see page 37.
Protects settings of setup menu against accidental
alteration.
Note
•
When this parameter is switched to “On,” “G” appears while the setup
menu is displayed on the video monitor.
5 Zone2
Adjustable range:
-30.0dB
to
+15.0dB
/
+16.5dB
*
(5.0 dB step)
Choices:
Off
*/
Mute
/
-80.0dB
to
+16.5dB
(0.5 dB step)
DSP Parameter
Memory Guard
Choices:
Off
*/
On
Off
Not protect settings.
On
Protects the settings of the setup menu
(except for the Memory Guard setting).
