20
UW10 Owner’s Manual
English
●
Installing the driver on a Windows 2000/XP system
1.
Start the computer.
2.
Use the included USB cable to connect the UW10 to the computer’s USB connector.
The system displays the message “Found New Hardware” and automatically
detects and installs the driver.
The window closes and the driver is installed.
●
Installing the driver on a Windows Me system
1.
Start the computer.
2.
Use the included USB cable to connect the UW10 to the computer’s USB connector.
The UW10 is powered on and the system automatically displays the “Add New
Hardware Wizard.”
3.
Check the radio button to the left of “Automatic search for a better driver (Rec-
ommended).” Click [Next].
4.
When the system finishes detecting and installing the driver, it displays the fol-
lowing message: “Windows has finished installing the new hardware device.”
Click [Finish].
The driver has been installed.
●
Verifying the installation
You can verify whether the driver has been installed correctly by following the
steps below:
1.
Double-click [My Computer | Control Panel | System].
If the System folder does not appear in the Control Panel on the Windows Me system,
click “view all Control Panel options.”
For Windows XP users: Click “Switch to Classic View” to change the Control Panel to
Classic View mode.
NOTE
NOTE
18
