Yamaha Steinberg USB Driver Installation Guide
4
Windows
You can change the driver settings from the control panel of the driver.
Opening the control panel of the driver
Use one of the following methods to open the control panel of
the driver.
• Select [Start]
[Control Panel]
[Hardware and Sound
(or [Sounds, Speech, and Audio Devices])] then click
[Yamaha Steinberg USB Driver]
• If you are using Cubase series 5.1 or later, from the Device
field on the Device Setup window (called up via [Device]
[Device Setup…]) of Cubase, select “Yamaha Steinberg
USB ASIO,” then click “Control Panel.”
Control panel of the driver
1
Device
Select the device using ASIO driver. This function is available
when two or more devices compatible with Yamaha
Steinberg USB Driver are connected to a computer.
2
Sample Rate
Specifies the sample rate of the device compatible with
Yamaha Steinberg USB Driver.
3
ASIO Buffer Size
Determines the buffer size for the ASIO driver.
4
Input Latency / Output Latency
Indicates the delay time for the audio input/output in
millisecond units. Audio latency differs depending on the
value of the ASIO Buffer Size. The lower the value of the ASIO
Buffer Size, the lower the value of Audio Latency.
Changing the driver settings
1
2
3
4
