Yamaha UMAX, Service Manual

Page: 101 / 320

GENERAL CHASSIS (1)
4-2
REMOVING THE SEATS
The following procedure applies to both of the
seats.
1. Remove:
• Seat cushion “1”
a. Lift the front of the seat cushion.
b. Pull the cushion off.
INSTALLING THE SEATS
The following procedure applies to both of the
seats.
1. Install:
• Seat cushion “1”
WARNING
A loose seat could cause the operator to lose
control, or cause the operator or passenger
to fall.
a. Insert the projections “a” on the rear of the
seat cushion under the seat frame.
b. Insert the projection “b” on the front of the
cushion into the grommet while pushing
the cushion downward.
TIP
Make sure the seats are properly secured before
riding.
1
a
a
1
b