62
Tyros5 Reference Manual
Example of Step Recording—Melodies (detailed instructions of Step 5 on
)
In this example, keep in mind that one of the steps (Step 4) involves holding down
a key on the keyboard while executing the operation.
Before executing the instructions below, select the desired Voice on the STEP
RECORD display. Note that only the Voice selection and Note input are possible
during Step Recording.
1
Enter the first and second notes with a slur.
1-1
Press the [G] button to select “f.”
1-2
Press the [H] button to select “Tenuto.”
1-3
Press the [I] button to select the “dotted” note type.
1-4
Select the dotted quarter-note by using the [6
] buttons.
1-5
Play the C3 key.
This enters the first note.
1-6
Press the [I] button to select the “normal” note type.
1-7
Press the [7
] button to select the eight-note length.
1-8
Play the D3 key.
This enters the second note.
2
Enter the next notes and apply staccato.
2-1
Press the [H] button to select “Staccato.”
2-2
Press the [6
] button to select the quarter-note length.
2-3
Play the keys E3 and F3 in order.
This completes the first measure.
3
To enter a quarter-note rest, press the [6
] button again.
To enter the rest, use the [4
]–[8
] buttons. (Press the button once to select the rest value, and once again
to actually enter it.) The BAR:BEAT:CLOCK indication at the lower left lets you confirm that a rest having the
specified note length has been entered.
1
2
3
4
* The numbers shown in the illustration correspond to
the following operation step numbers.
Since the actual note length (determined
via the Gate Time) may differ from the
note length on the notation, the Score of
the Song recorded here may be different
from the notation above.
NOTE
NEXT PAGE
