88
Tyros5 Owner’s Manual
8
8
Microphone
– Adding Harmony Vocals and Synth Vocoder to Your Singing –
By connecting a microphone to the [MIC INPUT] jack (accepts either
XLR or standard 1/4” phone plug connectors), you can enjoy singing
along with your keyboard performance or with Song playback. The instru-
ment outputs your vocals through the connected speaker system (page 15).
Moreover, you can automatically apply various Vocal Harmony effects to
your voice as you sing, or you can use Synth Vocoder to graft the unique
characteristics of your voice onto synthesizer and other sounds.
1
Before turning on the power of the instrument, set the [MIC
GAIN] knob to the minimum position.
2
Connect a microphone to the [MIC INPUT] jack.
3
Turn on the power of the instrument.
4
(If necessary, turn on the microphone.) Adjust the [MIC GAIN]
knob while singing into the microphone.
Adjust the [MIC GAIN] knob so that the INPUT LEVEL meter lights in green or
yellow on the MIC SETTING display (called up by pressing the [MIC SETTING]
button). Make sure that the meter does not light in orange or red, since this indi-
cates that the input level is too high.
Connecting a Microphone
A dynamic microphone with an imped-
ance of 250 ohms is recommended.
NOTE
The com
b
o jack accepts
either XLR or 1/4” phone
pl
u
g connectors.
NEXT PAGE
Summary of Contents for Tyros5-76
Page 122: ...122 Tyros5 Owner s Manual MEMO...
Page 123: ...Tyros5 Owner s Manual 123 MEMO...
Page 124: ...124 Tyros5 Owner s Manual...
