Yamaha Tyros5-76, Owner'S Manual

Page: 66 / 128

66 Tyros5 Owner’s Manual
You can create a new Multi Pad by making the links with WAVE files in the internal hard disk drive and USB flash mem-
ory to each of the Multi Pad. The WAVE files can be the data you’ve created in the Audio Recorder (page 76) and com-
mercially available ones. Multi Pads to which the WAVE files are linked are called Audio Link Multi Pads. The new
Audio Link Multi Pads can be saved in USER, HD and USB drives.
1
If you want to use WAVE files in the USB flash memory, connect
the USB flash memory containing the data to the [USB TO
DEVICE] terminal.
2
Press the MULTI PAD CONTROL [SELECT] button to call up the
Multi Pad Bank Selection display.
3
Press the [6

] (AUDIO LINK) button to call up the Audio Link
Multi Pad display.
A confirmation message may appear here. If so, follow the on-display instructions.
4
Select the desired Pad by pressing any of the [A], [B], [F] and
[G] buttons.
The WAVE display appears.
5
Select the desired WAVE file by using the [A]–[J] buttons.
6
Press the [EXIT] button to return to the Audio Link Multi Pad
display.
Creating a New Multi Pad with WAVE files (Audio Link Multi Pad)
Before using a USB flash memory, be
sure to read “Connecting USB Devices”
on page 101.
You will need to press the [C] (NEW
BANK) button in the Audio Link Multi
Pad display to create an Audio Pad, if an
Audio Link Multi Pad has been selected
when you pressed the [6

] (AUDIO
LINK) button. Otherwise, you are simply
re-selecting the link in the selected
Audio Link Multi Pad.
Make sure that MENU 1 is shown at the
bottom right corner of the display
(page 26).
A WAVE file cannot be linked to a MIDI
Multi Pad.
NOTE
NOTE
NOTE
NOTE
3
4
To confirm the information of the selected WAVE file
By pressing the [7

] (INFO.) button, you can confirm the information (title
name, bit rate and sample rate, etc.). Press the [F] (OK) button to close it.
NEXT PAGE