Tyros5 Owner’s Manual
47
1
Vo
ices –
Playing the
K
eyboar
d
–
Using the Pitch Bend Wheel
Use the PITCH BEND wheel to bend notes up (roll the wheel away from you) or down
(roll the wheel toward you) while playing the keyboard. Pitch Bend is applied to all key-
board parts (RIGHT 1–3 and LEFT). The PITCH BEND wheel is self-centering and will
automatically return to normal pitch when released.
The maximum pitch bend range can be changed on the Mixing Console display: [MIX-
ING CONSOLE]
TAB [
][
] TUNE
[C]/[H] PITCH BEND RANGE.
Using the Modulation Wheel
The Modulation function applies a vibrato effect to notes played on the keyboard. By
default, this is applied to the keyboard parts (RIGHT 1–3). Moving the MODULATION
wheel down (toward you) decreases the depth of the effect, while moving it up (away from
you) increases it.
You can set whether the effects produced by using the MODULATION Wheel will be
applied or not to each of the keyboard parts: [FUNCTION]
[D] CONTROLLER
TAB [
][
] KEYBOARD/PANEL
[A]/[B] 3 MODULATION WHEEL.
Using the Wheels
The effects produced by using the
PITCH BEND Wheel may not be applied
to the LEFT part during Style playback,
depending on the Style setting.
NOTE
Depending on the selected Voice, the
MODULATION wheel may control vol-
ume, filter or some other parameter
instead of vibrato.
To avoid accidentally applying modula-
tion, make sure the MODULATION
Wheel is set at minimum (down) posi-
tion before you start playing.
The effects produced by using the
MODULATION wheel may not be
applied to the LEFT part during Style
playback, depending on the Style set-
ting.
NOTE
NOTE
NOTE
Summary of Contents for Tyros5-76
Page 122: ...122 Tyros5 Owner s Manual MEMO...
Page 123: ...Tyros5 Owner s Manual 123 MEMO...
Page 124: ...124 Tyros5 Owner s Manual...
