Yamaha Tyros5-76, Owner'S Manual, Page: 103 / 128

Tyros5 Owner’s Manual 103
11
Connections –
Using
Yo
ur Instrument with Other Devices –
By connecting a computer to the [USB TO HOST] terminal, you can transfer data between
the Tyros5 and the computer via MIDI. For details on using a computer with this instru-
ment, refer to the “Computer-related Operations” on the website.
Connecting to a Computer ([USB TO HOST] terminal)
Use an AB type USB cable of less
than 3 meters. USB 3.0 cables
cannot be used.
• When using a USB cable to connect
the instrument to your computer,
make the connection directly without
passing through a USB hub.
• The instrument will begin transmis-
sion a short time after the USB con-
nection is made.
• For information on setting up your
sequence software, refer to the
owner’s manual of the relevant soft-
ware.
• You can also use the MIDI [IN]/[OUT]
terminals to connect to a computer. In
this case, a USB-MIDI interface (such
as the Yamaha UX16) is needed. For
more information, refer to the owner’s
manual of the USB-MIDI interface.
NOTICE
NOTE
A type
USB ca b le
B type