manualshive.com logo in svg

Yamaha Tyros4, Reference Manual

Share
Download
Yamaha Tyros4 Reference Manual Download Page 57

Tyros4  Reference Manual

57

3

Songs – 

Rec
o

rding Y

o

ur Per

for

mances and 

Crea

ting Songs –

The Tyros4 has a variety of Song playback functions—repeat playback, various guide settings, etc.—which can be 
accessed in the display below.

Call up the operation display. 

[FUNCTION] 

 [B] SONG SETTING

Song Playback Related Parameters (Repeat settings, Channel settings, 
Guide Function)

[A]/[B]

GUIDE MODE

See 

page 58

.

[1 



]

GUIDE ON/OFF

[G]

REPEAT MODE

Determines the method of repeat playback.

OFF:

 Plays through the selected Song, then stops.

SINGLE:

 Plays through the selected Song repeatedly.

ALL:

 Continues playback through all the Songs in the specified folder repeatedly.

RANDOM:

 Continues playback at random through all the Songs in the specified 

folder repeatedly.

[H]

REPEAT FOLDER

Determines the directory in which the Songs are played in sequence when the 
REPEAT MODE is set to “ALL” or “RANDOM.” Here, the directory refers to the 
path memorized to each of the SONG [I]–[IV] buttons.

CURRENT:

 Sequentially plays all Songs in the directory containing the currently 

selected Song, starting with the currently selected Song.

ALL:

 Sequentially plays all Songs in all directories (memorized to the SONG 

[I]–[IV] buttons). Playback starts with the currently selected Song, then the 
remainder of the Songs in the current directory, followed by the Songs in the other 
directories.

[I]

PHRASE MARK 
REPEAT

Phrase Mark is a pre-programmed part of some Song data, which specifies a certain 
location (set of measures) in the Song. When this is on, the section corresponding to 
the specified Phrase Mark number is repeatedly played back.

[2 



]

LEFT CH

These parameters determine which MIDI channel in the Song data is assigned to the 
Left- or Right-hand part of the Guide function and the Song Score function.

[3 



]

RIGHT CH

[4 



]

AUTO CH SET

When set to “ON,” this automatically sets the proper MIDI channels for the Right- 
and Left hand parts pre-programmed in the commercially available Song data. Nor-
mally, this should be set to “ON.”

[5 



]/

[6 



]

LYRICS 
LANGUAGE

Determines the language of the displayed lyrics.

AUTO:

 When the language is specified in the Song data, the lyrics are displayed 

accordingly. When the language is not specified in the Song data, the lyrics lan-
guage is regarded as INTERNATIONAL below.

INTERNATIONAL:

 Handles the displayed lyrics as a western language.

JAPANESE:

 Handles the displayed lyrics as Japanese.

NEXT PAGE

Summary of Contents for Tyros4














































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands