124
Tyros4 Reference Manual
In this section, you can make MIDI-related settings for the Tyros4. The Tyros4 gives you a set of ten pre-programmed
templates that let you instantly and easily reconfigure the instrument to match your particular MIDI application or exter-
nal device. Also, you can edit the pre-programmed templates and save up to ten of your original templates to the USER
display.
1
Call up the operation display.
[FUNCTION]
[H] MIDI
2
Select a pre-programmed template from the PRESET Page
(
).
If you have already created your original template and saved it to the USER Page,
you can also select the template from the USER Page.
3
Press the [8
] (EDIT) button to call up the MIDI display to edit
the selected template.
4
Use the TAB [
][
] buttons to call up the relevant setting dis-
play.
•
SYSTEM
.................. MIDI System Settings (
•
TRANSMIT
............. MIDI Transmission Settings (
•
RECEIVE
................. MIDI Reception Settings (
)
•
BASS
......................... Settings for the bass note of chord for Style playback via
MIDI reception data (
•
CHORD DETECT
... Settings for the chord type for Style playback via MIDI
reception data (
)
•
MFC10
...................... Settings for a connected MFC10 MIDI Foot Controller
5
When you’ve finished editing, press the [EXIT] button to return
to the MIDI template Selection display.
6
Select USER tab display by using the TAB [
][
] buttons, then
press the [6
] (SAVE) button to save the edited template.
MIDI Settings
You can save all your original templates
as a single file to a USB storage device:
[FUNCTION]
[I] UTILITY
TAB
[
][
] SYSTEM RESET
[G] MIDI
SETUP FILES. See
.
NOTE
3
6
2
