Yamaha Tyros4, Reference Manual

Page: 121 / 141

Tyros4 Reference Manual 121
11
Connections –
Using
Tyros4 with Other Devices –

TALK MIXING (selected by [E] button)
Assigning Specific Functions to Each Foot Pedal
The functions assigned by default to the connected footswitch or foot controller can be changed—for example, letting
you use the footswitch to start/stop Style playback, or use the foot controller to produce pitch bends.
1
Call up the operation display.
[FUNCTION]

[D] CONTROLLER

TAB [

][

] FOOT PEDAL
2
Use the [A]/[B] buttons to select one of three foot pedals to
which the function is to be assigned.
3
Use the [C]/[D] buttons to select the function to be assigned to
the pedal specified in step 2.
For information on available parameters, see pages 122–123 .
4
Use the [1

]–[8

] buttons to set the details of the
selected functions (the part for which the function is applied,
etc.).
The available parameters differ depending on the function selected in step 3.
5
If necessary, set the polarity of the pedal by using the [I] button.
Pedal on/off operation may differ depending on the particular pedal you’ve con-
nected to the Tyros4. For example, pressing down on one pedal may turn the
selected function on, while pressing a different make/brand of pedal may turn the
function off. If necessary, use this setting to reverse the operation.
[1

] VOLUME Determines the output volume of the microphone sound.
[2

] PAN Determines the stereo pan position of the microphone sound.
[3

] REVERB DEPTH Determines the depth of the reverb effects applied to the microphone sound.
[4

] CHORUS DEPTH Determines the depth of the chorus effects applied to the microphone sound.
[5

]/
[6

]
REDUCTION
LEVEL Determines the amount of reduction to be applied to the overall sound (excepting the micro-
phone input)—allowing you to effectively adjust the balance between your voice and the over-
all instrument sound.
Footswitch/Foot Controller Settings
For information on how to connect a
foot pedal or what kinds of pedals can
be connected, refer to the Owner’s Man-
ual, chapter 11.
NOTE
2
3
5
4
You can also assign the other functions
to the pedal—punch in/out of Song/
Audio Recorder/Player (
pages 68, 90 )
and Registration Sequence ( page 85 ). If
you assign multiple functions to the
pedal, the priority is: Punch in/out of
Song or Audio Recorder/Player

Reg-
istration Sequence

Functions
assigned here.
NOTE