Yamaha Tyros3, Service Manual

Page: 114 / 213

Tyros3
114
SYSTEM RESET
There are two reset methods in the SYSTEM RESET display: Factory Reset and Custom Reset.
Factory Reset–Restoring the Factory Programmed Settings
This function lets you restore the status of the Tyros3 to the original factory settings.
1
Select the desired item to be restored by using [1
pq
]–[3
pq
] buttons and add a checkmark to it by pressing
the [4
p
] (MARK ON) button.
To remove the checkmark, press the [4
q
] (MARK OFF) button.
2
Press the [D] (FACTORY RESET) button to execute the Factory Reset operation for all checkmarked items.
Factory Reset
(see below)
Custom Reset
(see page 126)
SYSTEM SETUP
Restores the System Setup parameters to the original factory settings. Refer to the Data List for details
about which parameters belong to the System Setup.
MIDI SETUP
Restores the MIDI settings including the MIDI templates on the USER tab display to the original
factory status.
USER EFFECT
Restores the User Effect settings including the user effect types, user master EQ types, user
compressor types, and user vocal harmony types created via the Mixing Console display to the
original factory settings.
MUSIC FINDER
Restores the Music Finder data (all records) to the original factory settings.
FILES & FOLDERS
Deletes all
fi
les and folders stored in the USER tab display.
REGIST
Temporarily deletes the current Registration Memory settings of the selected Bank. The same can
be done also by turning the [POWER] button ON while holding the B5 key (rightmost B key on the
keyboard).
EXPANSION VOICE
Deletes all Expansion Voices.