Yamaha Tyros3, Reference Manual

Page: 27 / 130

1
1
V
oices – P
laying the K
eyboar
d –
Tyros3 Reference Manual •
27
Loading a single Additional Voice to the Tyros3—Individual Load
This operation allows you to load a single additional Voice (including from Custom Voices, Custom Drum Voices
and downloaded Premium Voices) to the Expansion Voice bank in the instrument for playing or editing.
1
Call up the operation display.
[VOICE CREATOR]
→
[D] INDIVIDUAL LOAD
2
Use the TAB [ Q Q
Q Q
][ W W
W W
] buttons to select the location or device containing
the desired Voice.
3
Select the desired Voice in the display.
If you select a Custom Voice/Custom Drum Voice, the Expansion Voice bank
appears.
If you select a Voice which has been downloaded from the website, loading
will automatically start and steps 4–7 are omitted.
4
By using the [A]–[J] buttons and [1
▲
]–[8
▲
] buttons, select the desti-
nation for the Voice.
5
Press the [6
▲
] (ASSIGN) button.
6
If desired, enter a name for the Voice.
If a Voice with the same name already exists in the bank, you’ll need to enter a
new name for the Voice.
7
Press the [8
▲
] (OK) button to start loading.
To cancel, press the [8
▼
] (CANCEL) button.
After the loading is finished, you can select the Voice from the [EXPANSION]
button.
[G] ALIAS Saves only Alias markers (shortcuts) of the selected data to the specified loca-
tion. This lets you save multiple Libraries of your Voice data and make multiple
folders containing different collections of your Voices, without taking up addi-
tional memory space on the drive. As long as the Voice data exists in one loca-
tion on the drive, you can save an Alias that will recall that data.
When you save a Voice to some Libraries by using ALIAS and edit the Voice, the edit you per-
form affects all Libraries which include the edited Voice.
NOTE
4
4
5
File loading may take as little as a cou-
ple of seconds or as long as a few min-
utes, depending on how much data is
contained in the Voice.
NOTE