1
1
V
oices – P
laying the K
eyboar
d –
Tyros3 Reference Manual •
21
14
Assign the file (saved on step 13) to an Expansion Voice bank.
This step assigns the saved Voice to the Expansion Voice bank, letting you
select it from the [EXPANSION] button on the panel. In this step, the link
between the Expansion Voice bank and the saved Voice file is actually stored.
14-1
Press the [J] (ASSIGN BANK) button.
14-2
Select the desired location in the bank by using the [A]–[J] buttons.
14-3
Press the [6
▼
] (ASSIGN) button.
The same Voice name that you entered in the Save operation (step 13)
is selected automatically. Normally, you should keep this name.
14-4
Press the [8
▲
] (OK) button.
The Voices which have been saved and assigned are automatically loaded to
the internal memory when the power of the instrument turned on. If the Voice
is contained in a USB storage device, automatic loading may not be possible
because of the time needed to recognize the device. If this happens, copy the
Voice to another device and try it again.
15
Press the [EXIT] button.
If you want, you can continue adding waves. Repeat steps 5–14.
Summary of Contents for Tyros3
Page 1: ...EN Reference Manual ...
