11
11
U
tility – M
aking G
lobal S
ettings –
Tyros3 Reference Manual •
123
You can set or execute important media-related operations for the Tyros3. The word
“media” refers to both the USB storage device and installed hard disk drive.
MEDIA
The Tyros3 is capable of formatting an
installed hard disk having a cluster size
of less than 32 Kbyte, creating a single
partition only; multiple partitions cannot
be created. However, if the installed
hard disk has been pre-formatted into
several partitions on another instru-
ment, the Tyros3 can access up to four
partitions of the hard disk.
NOTE
[A]/[B]
DEVICE LIST
Selects the desired media which you want to check the remaining memory
(see “PROPERTY” below) or format the media (see the Owner’s Manual).
[1
▲▼
]/
[2
▲▼
]
HARD DISK SLEEP
TIME
The hard disk unit will go into a “sleep” mode after a specified time of inactiv-
ity, both to maximize the lifetime of the hard disk and to minimize unneces-
sary mechanical noise. This parameter determines the sleep time.
[3
▲▼
]/
[4
▲▼
]
SONG AUTO
OPEN
Turns the Song Auto Open function on or off. When this is set to “ON” and
the media selected in the Device List above is inserted, the Tyros3 automati-
cally calls up the first Song in the media.
[F]
PROPERTY
Opens the Property display of the media selected by [A]/[B] buttons. You can
check the amount of remaining memory on the media.
[H]
FORMAT
Formats the media selected by [A]/[B] buttons. Refer to the Owner’s Manual.
When using the Hard Disk Recorder function, make sure to set this to “NEVER.” If you set this
to something other than “NEVER,” the Hard Disk Recorder may not operate correctly.
NOTE
When you select a Song on a CD-ROM drive to be auto-opened, the Song may not be called
up automatically if the CD-ROM drive takes a lot of time to be recognized.
NOTE
The displayed remaining memory value is an approximate value.
NOTE
Summary of Contents for Tyros3
Page 1: ...EN Reference Manual ...