Star
ting U
p
16
• Tyros3 Owner’s Manual
Starting Up
This section contains information about setting up your Tyros3 and preparing to play. Be sure to read through
this section carefully before turning the power on.
1
Make sure the POWER ON/OFF switch on the Tyros3
is set to OFF.
2
Connect the supplied power cord to the AC IN termi-
nal on the instrument’s rear panel.
3
Connect the other end of the power cord to an AC
outlet.
Make sure your Tyros3 meets the voltage requirement for the coun-
try or region in which it is being used.
Before you switch your Tyros3 on or off, make sure that the MASTER
VOLUME and INPUT VOLUME are set to “MIN” and the volume of
any connected audio equipment is turned down.
1
Press the [POWER ON/OFF] switch on the rear
panel.
2
Use the [MASTER VOLUME] dial to adjust the vol-
ume to an appropriate level.
Power Supply
Make sure your Tyros3 is rated for the AC voltage
supplied in the area in which it is to be used (as
listed on the bottom). Connecting the unit to the
wrong AC supply can cause serious damage to the
internal circuitry and may even pose a shock haz-
ard!
Use only the AC power cord supplied with the
Tyros3. If the supplied cord is lost or damaged and
needs to be replaced, contact your Yamaha dealer.
The use of an inappropriate replacement can pose
a fire and shock hazard!
The type of AC power cord provided with the Tyros3
may be different depending on the country in which
it is purchased (a third prong may be provided for
grounding purposes). Improper connection of the
grounding conductor can create the risk of electri-
cal shock. Do NOT modify the plug provided with
the Tyros3. If the plug will not fit the outlet, have a
proper outlet installed by a qualified electrician. Do
not use a plug adapter which defeats the grounding
conductor.
WARNING
WARNING
WARNING
Turning the Power On
In order to avoid possible damage to the speakers
or other connected electronic equipment, always
switch on the power of the Tyros3 before switching
on the power of the amplified speakers or mixer
and amplifier. Likewise, always switch off the
power off the Tyros3 after switching off the power of
the amplified speakers or mixer and amplifier.
Even when the POWER switch is turned off, elec-
tricity is still flowing to the instrument at the mini-
mum level. When you are not using the instrument
for a long time, make sure you unplug the power
cord from the wall AC outlet.
CAUTION
CAUTION
1
2
Summary of Contents for Tyros3
Page 1: ...EN Owner s Manual...
