Tyros / TRS-MS01
24
■
DISASSEMBLY PROCEDURE (TRS-MS01)
1.
Rear Panel (Time required: about 1 min)
[30]
AMP Assembly
Cover
2.
AMP Assembly (Time required: about 3 min)
2-1
Remove the rear panel. (See procedure 1)
L
R
TO KEYBOARD
[17]
[18]
[19]
[16]
Rear Panel
(Fig.1)
(Fig.2)
[16]: Bind Head Bonding Screw-B 3x10 MFC2BL (EN335030)
[17]: Bind Head Screw-P 3x12 MFC2BL (EX601360)
[18]: Bind Head Screw 3x8 MFC2BL (ED330086)
[19]: Bind Head Screw-S 4x8 MFC2BL (EK396010)
[30]: Bind Head Tapping Screw 4x20 MFZN2BL (EP040070)
1-1
Remove the eight (8) screws marked [30]. (Fig.1, Fig.2)
(The screws to be removed are indicated by arrows on
the panel.)
*
When reinstalling the rear panel, confirm that the pack-
ing is not damaged to avoid air leakage.)
2-2
Remove the two (2) screws marked [17], the four (4)
screws marked [18], the four (4) screws marked [19].
The AMP assembly can then be removed. (Fig.2)
