manualshive.com logo in svg

Yamaha TX4n, Reference Manual

The Yamaha TX4n Owner's Manual is available for free download at manualshive.com. This comprehensive manual provides detailed instructions and guidelines, empowering users to maximize their experience with the Yamaha TX4n. Easily access the manual to learn about the product's features, setup, and operation in just a few clicks.

Share
Download
background image

TX6n/5n/4n  Reference Manual

44

System Connection Examples

Here is an example of multiple amplifiers connected in a daisy-chain via analog audio signals or digital audio sig-

nals (e.g., AES/EBU).

In the case of analog connection, daisy-chain the [THRU] jack and [IN] jack.

In the case of digital connection (the standard AES-IO card), daisy-chain the [THRU] jack and [IN] jack, or the 

[OUT] jack and [IN] jack. The [THRU] jack will output the input signal without change, and the [OUT] jack will 

output the signal with processing applied.

In order to monitor and control the amplifiers from Amp Editor, use Ethernet cables to connect the computer to each amplifier. 
This allows you to monitor and control all of the amps in the workspace from a single computer.
In the case of digital connections, you’ll need to make word clock settings 

(page 20)

. Specify whether you want the slot’s 

CH 1/2 to be the master clock, or turn Auto Scan Mode on. 

Daisy-chain connection via analog or digital audio

Network switch

Amp control

TXn

Amp Editor

Computer

Amp control

Amp control

Amp control

TXn

TXn

Mixer

THRU/
OUT

IN

THRU/
OUT

IN

IN

Analog audio 

or 

Digital audio

Analog audio 

or 

Digital audio

Analog audio 

or 

Digital audio

Summary of Contents for TX4n





























































Reviews:

No comments

Related manuals for TX4n

Parasound 5250 Owner'S Manual preview
5250
Brand: Parasound Pages: 16
Quest Engineering M120 Owner'S Manual preview
M120
Brand: Quest Engineering Pages: 19
Zeck Audio A600 Service Manual preview
A600
Brand: Zeck Audio Pages: 6
NAD C3050 Quick Setup Manual preview
C3050
Brand: NAD Pages: 2
NAD C3050 Manual preview
C3050
Brand: NAD Pages: 16
R&R Ampflication DP-13 Manual preview
DP-13
Brand: R&R Ampflication Pages: 16
Xantech ZPR68-10 Installation Instructions Manual preview
ZPR68-10
Brand: Xantech Pages: 16
Xantech MX88 Installation Instructions Manual preview
MX88
Brand: Xantech Pages: 44
Xantech MRC88 Installation Instructions preview
MRC88
Brand: Xantech Pages: 2
Xantech MRC88 Installation Instructions Manual preview
MRC88
Brand: Xantech Pages: 102
Xantech BXAUDIO4X4 Installation Instructions Manual preview
BXAUDIO4X4
Brand: Xantech Pages: 36
ZABKZ P.A. Series Owner'S Manual preview
P.A. Series
Brand: ZABKZ Pages: 4
D.A.S. DX-80 User Manual preview
DX-80
Brand: D.A.S. Pages: 15
Advance acoustic AX-5 Quick Start Manual preview
AX-5
Brand: Advance acoustic Pages: 18
Samson Power Amplifier Servo 120 Owner'S Manual preview
Power Amplifier Servo 120
Brand: Samson Pages: 13
Burson DIGNA Assembly Manual preview
DIGNA
Brand: Burson Pages: 8
Cary Audio Design HH-1 Owner'S Manual preview
HH-1
Brand: Cary Audio Design Pages: 20
Harley Benton TUBE5 Celestion User Manual preview
TUBE5 Celestion
Brand: Harley Benton Pages: 28

Brands by name

Popular brands

Load more brands