Perio
d
ic maintenance an
d
a
d
justment
7-31
7
6. Connect the brake cable to the
brake camshaft lever, and then in-
stall the brake lever free play ad-
justing nut on the brake cable.
TIP
If the spring was removed, install it
onto the brake cable with its smaller di-
ameter end facing down.
7. Adjust the brake lever free play.
8. While applying the front brake,
push down hard on the handlebar
several times to check for proper
fork operation.
EAU25081
Rear wheel
EAU56734
To remove the rear wheel
1. Loosen the axle nut.
2. Remove the brake pedal free play
adjusting nut, and then discon-
nect the brake rod from the brake
camshaft lever.
3. Fully loosen the locknut and drive
chain slack adjusting nut on each
end of the swingarm.
Ti
g
htenin
g
torque:
Axle nut:
35 N·m (3.5 kgf·m, 26 lb·ft)
1. Brake cable
2. Spring
1
2
1. Axle nut
2. Washer
3. Drive chain slack adjusting nut
4. Locknut
5. Drive chain puller
1. Brake pedal free play adjusting nut
2. Brake rod
3. Brake camshaft lever
1
5
4
3
2
1
2
3
U2CJ86E0.book Page 31 Tuesday, June 26, 2018 10:28 AM