6-7
ELEC
–
+
ELECTRIC STARTING SYSTEM
STARTING CIRCUIT CUT-OFF SYSTEM
OPERATION
If the main switch is set to "ON", the starter motor
can only operate if at least one of the following
conditions is met:
• The transmission is in neutral (the neutral
switch is closed).
• The clutch lever is pulled to the handlebar (the
clutch switch is closed).
The starting circuit cut-off relay prevents the
starter motor from operating when neither of
these conditions has been met. In this instance,
the starting circuit cut-off relay is open so current
cannot reach the starter motor. When at least
one of the above conditions has been met the
starting circuit cut-off relay is closed and the
engine can be started by pressing the start
switch.
1
Battery
2
Main fuse
3
Main switch
4
Start switch
5
Starting circuit cut-off relay
6
Neutral switch
7
Clutch switch
8
Starter relay
9
Starter motor
X X X
WHEN THE TRANSMISSION IS IN
NEUTRAL
WHEN THE CLUTCH LEVER IS
PULLED TO THE HANDLEBAR
1
2
M
3
8
5
4
6
9
7
ELECTRIC STARTING SYSTEM
Summary of Contents for TT-R125EY
Page 1: ...TT R125EY TT R125LEY 1B2 F8197 14 SERVICE MANUAL LIT 11626 22 26 ...
Page 10: ...MEMO ...
Page 257: ......
Page 258: ...YAMAHA MOTOR DA AMAZÔNIA LTDA ...