Yamaha TT-R0EX, Owner'S Manual

Page: 23 / 78

INSTRUMENT AND CONTROL FUNCTIONS
3-2
3
EAU39860
Speed limiter
Your motorcycle was delivered with an
adjustable speed limiter. The speed
limiter keeps the throttle from fully
opening, even when the throttle grip is
turned to the maximum.
1. Loosen the locknut.
2. To increase the maximum engine
power available and the maximum
speed of the motorcycle, turn the
adjusting screw in direction (a). To
decrease the maximum engine
power available and the maximum
speed of the motorcycle, turn the
adjusting screw in direction (b).
3. Tighten the locknut.
WARNING
EWA14400
Improper adjustment of the speed
limiter and throttle could cause
throttle cable damage or improper
throttle operation. You could lose
control, have an accident or be in-
jured. Do not turn the adjusting
screw out more than 25 mm (0.98 in)
or the throttle cable could be dam-
aged. Always make sure the throttle
cable free play is adjusted to 3.0–5.0
mm (0.12–0.20 in). (See page 6-11.)
EAU39850
Shift pedal
This motorcycle is equipped with a con-
stant-mesh 3-speed transmission. The
shift pedal is located on the left side of
the engine. Neutral is at the bottom po-
sition.
1. Locknut
2. Adjusting screw
1 2
(b)
(a)
1. No more than 25 mm (0.98 in)
1
1. Shift pedal
U1P681E0.book Page 2 Tuesday, April 18, 2006 2:38 PM