Yamaha TSX-B237 Owner'S Manual Download Page 6

Page: 6 / 47

Part names

Display

Bluetooth indicators (



p. 12)

App (Multimedia Music Controller app) indicator

The indicator is displayed when the app is in use.

Input source indicator

The selected input source is displayed.

Shuffle and repeat indicators (



p. 22)

Current time

Qi wireless charging indicator (

Alarm indicators (

Child lock indicator (

Sleep indicator (

Multi display

Displays a variety of information, including that for a song as it plays, radio
frequency, etc.
Some information may be cut off as there is a limit on the number of characters
that can be displayed.

Note

Display brightness can be adjusted as required.

•

Auto (default setting; adjusted automatically in accordance with ambient lighting.)

•

Manual (10 levels)

See “Adjusting display brightness (dimmer)” (



p. 31) to configure this function.

8 9

Summary of Contents for TSX-B237
















































Search results

Summary of Contents for TSX-B237

Reviews:

Related manuals for TSX-B237

Brands by name

Popular brands

Yamaha TSX-B237, Owner'S Manual

Search results

Summary of Contents for TSX-B237

Reviews:

Related manuals for TSX-B237

Brands by name

Popular brands